The Smooch Sign

(I get no revenue from any products I mention. I simply mention products and stores to let you know where I got something and what it is.)

I love making a sign. And I seem to love making them the old fashioned way–painting them! Last year I painted this Christmas tree farm sign, and I just love it so much! It was a lot of work, but so worth it. The month before that, I did this sign, which goes above the window at my kitchen sink each holiday season. This year, after sighing and drooling all over Pinterest’s selection of yuletide bedroom decor, I decided to paint a sign for my bedroom.

First, I sketched out the word “mistletoe” in a fancy style. I just used pencil and sketchbook paper. I had to tape pieces of paper together to get the length of the lettering I needed for my canvas. I believe my canvas was 12″ by 36″.

Next, I used an Xacto knife to cut out the lettering, being careful not to completely detach the counter forms of letters.

Next, I prepared my blank canvas by mixing up some paint to give me a beautiful red finish. I didn’t purchase any paint for this project, but rather used what I had on hand, which is why I ended up using some fabric paint.

Now I was ready to paint the entire canvas red. After a good coat of paint, I used some white to blend in to give this base a more textured or rendered look.

I had to let the canvas dry overnight before using my paper stencil to paint the “mistletoe” lettering on. This was not as smooth as it could have been because my stencil was just sketchbook paper, not stencil plastic. I did spray a very light coating of adhesive onto the back of my paper stencil, to help keep it in place. Then I used a little sponge pouncer-type applicator to apply the white paint through the stencil. I knew the stenciling wouldn’t be perfect but that was okay because I do like to clean up the lettering with a paintbrush, which is what I definitely had to do until I was satisfied with the look of the sign.

Next up, I needed to get the words “MEET ME UNDER THE” very small at the top of the sign. I could have painted this on, but I realized I had purchased a used Sizzix die cut alphabet from a seller on eBay and I checked right away to see if the letters were the appropriate size, and they were! Woo hoo!

And ta-daah! Here is the finished sign, which I planned on hanging above my bed.

There are four square windows above my bed and I knew the sign would go in the center of this configuration but not cover any windows completely. My plan was to make little mistletoe wreaths (of course I saw some on Pinterest) to go in each of the end windows. I happened to have two small grapevine wreaths on hand, and plenty of kelly green felt. What I didn’t have was a lot of other shades of green and this was vital to give my little wreaths a more natural look. What I ended up doing was using my Sizzix die cutting machine to cut out lemon/lime shapes, which I then painted and trimmed to look like leaves. Sure, this was more labor-intensive than just heading to the store to get other shades of green felt, but I wasn’t sure if I’d even find the shades I needed. So I started mixing up some paint, and fabric paint was a good choice, as it remains flexible once dry. These painted felt shapes needed more dry time than I wanted (I can be impatient at times) but it was vital that I work with dry shapes to avoid getting my scissors and fingers coated in green paint.

To form the leaves, I simply pinched one end of the leaf then used a bit of hot glue to hold that in place. At first, I tried using floral stem wire to attach each leaf to the wreaths but realized it was going to take too much wire and too much time. So I simply attached the leaves onto the grapevine wreaths using more hot glue. I then added little white pom poms I had on hand.

When it came time to put the wreaths in the windows on either side of the mistletoe sign, I realized the scale was off. In other words, the little wreaths were too little. I needed to do something to remedy this and of course, I was unwilling to go buy bigger grapevine wreaths and go through the whole paint felt/dry felt/cut felt process again. So I had a little brainstorming session.

I decided to use more felt, in a flatter fashion to make the wreaths look bigger. It’s not a perfect solution but I think it works for my taste and my windows. I laid out a wreath on a green piece of felt and drew with a pencil some leaf shapes that basically outline the wreath but add a couple inches. I had one piece of a nice green felt that I wanted to use and it was not enough for both wreaths, so I cut it in half, and used half of it along with some kelly green felt for the base piece. Then I used scraps to cut more leaves and then placed them around in a way that I felt looked pleasing. I used my sewing machine and green thread to quickly attach the loose leaves to the leafy base. I then used thread to tack the new base to the grapevine leaves, as well as some hot glue. Here is the result.

I used 3M command hooks to attach the mistletoe sign to the woodwork in the very center of the windows, and used small command hooks to attach the wreaths right to the glass. And here is the finished look!

I am so pleased with how the mistletoe sign and the wreaths turned out! I do spend a lot of time looking at the pins I saved on Pinterest with these totally decked out holiday bedrooms. But I have to keep in mind how staged those rooms are, and I’m asking for trouble if I put an old fashioned sled at the foot of my bed along with steaming mugs of hot chocolate. My husband would break a leg and my white bedding would be destroyed! Instead, I had a little pencil-style Christmas tree near the large window (not shown) with just white lights. The cats would have treated ornaments on this tree as cat toys and I don’t want to get upset with them for being cats. I also put the three cone trees I made on one of my dressers atop a plain red dresser scarf, and a real planted pine tree plant. Oh and the two knit pillows that were super quick to knit up in bulky yarn. It was all just the right amount of Christmas cheer I needed in my room.

For next Christmas, I would like to make a simple quilt in traditional colors for my room. Stay tuned!

Thanks for stopping by to check out my projects! I hope you get some inspiration here!

Jenny

Much crafting

*please note there are no affiliate links in this blog post. I simply add links to patterns or tutorials that I used to make things.

Fall and winter of 2021 was a season of so much crafting for me! It was really fun and productive. Many projects were to spruce up my home for the holidays. There were also a few gifts made!

*Here are just nine things I’ve made in the fall and winter of 2021*

Starting from upper left corner, here is my finished Three Witches by Barbara Ana Designs. This was so fun to stitch and I finished it onto a board from Michael’s with some spooky ribbon, a wooden mushroom from Germany, some large rick rack, and mounted the stitching on a piece of chipboard with a fabric covered board behind it.

The next two photos are three punch needle ornaments from an issue of Punch Needle and Primitive Stitcher Magazine. I used floss I had on hand, including some fancy flosses and finished the ornaments with wool trim. I have a little pencil style artificial tree I keep up year round and I had it all decked out with autumn decor.

Middle row left is a photo of my spooky owl lantern, designed by Christopher Hiedeman. I love watching his YouTube videos, whether they’re about his beautifully decorated Victorian home or a tutorial on making something vintage-looking. I found his video on how to make this paper mâché looking owl and loved creating it. The eyes are so brightly colored in this photo because there is a battery operated tea light inside the lantern. It looks so neat on the front porch with other autumn decor.

In the very center of the collage is my finished and framed Feast of Friendship cross stitch by Blackbird Designs. I am in love with this piece and am so happy with the framing. I purchased the design and flosses at Stitchville USA in Minnetonka, MN and also had them do the framing. I had coffee-tea dyed the 28 ct. Monaco fabric myself and I’m very happy with the overall look of the piece.

Middle row right are two knitted ornaments I made. I have this wonderful book called Colorwork Creations: Knit Woodland Inspired Hats, Mittens and Gloves by Susan Anderson-Freed. I used the patterns for the cardinal and the nut hatch to make these little pillow ornaments.

The little heart ornament on the bottom left is just a creation I made after browsing thru Pinterest and seeing a similar felt and needlework ornament.

Bottom row middle pic is my finished Merry Chalkfull cross stitch which is one of several design collaborations between Priscilla Blain of Stitching with the Housewives and Cathy Haberman of Hands on Design. This was a gift for my mother-in-law. I’m trying to make all of the Chalkfulls for her.

And the last pic is of my Christmas tree cones made with poster board and yarn and some little pom poms. I see these in stores and I refuse to pay for something I can easily make on my own with supplies I have on hand. I did have to buy school grade poster board, as the only board I had was too heavy to be manipulated.

Seems like a lot of crafting, right? It was! But that wasn’t all. In my next post, I will go into detail how I made a painted sign for my bedroom for Christmas decorating.

Late to the “red truck” party

Last year around the end of November, when I normally get my Christmas decorating done, I pulled out this seasonal dish towel and thought it would be a great thing to paint on one of the square canvases I had in my closet. So I photocopied the towel and then set it aside and did nothing that year. Then this year, I was cleaning up my desk and found the copy and I thought “I should really paint this, it’s cute!” And I’m only a zillion years late to the red truck party!

Have you noticed all the holiday things with red trucks? Once you start looking, it seems that they’re everywhere! Put “red truck” in the search field of Pinterest and wow. Just wow. I am a little surprised I didn’t see toilet tissue with red trucks, but I digress.

Photo collage of a seasonal dishtowel with a red truck design, and photocopies of the image used to enlarge it.

I had to enlarge the photocopy 300% to have it fit nicely on the square canvas, which was about 18″ square. (I’m sitting in my family room, writing this blog post, and I cannot be bothered to get up and measure the painting 😆) It was a little fiddly to enlarge the image on my outdated desktop printer/scanner. But I managed to get all of the image and then used my portable light table to line up the images and tape them together.

Photo collage of the image enlarged 300%

Next, I painted the blank canvas with some golden yellow chalk paint with a little brown acrylic paint mixed in. This would not be the actual background color. This was just an undercoat.

Photo collage showing the golden yellow color being painted on the canvas.

When that was all dry, I painting over the entire canvas with flat house paint I had in the basement. It is Antique White. When that top coat dried, I used some sandpaper to distress the white finish and have some of the golden yellow base coat show through.

Next, I used the “old school” transfer method I talked about in this blog post to transfer the image onto the newly painted canvas. This took some time. And during this process, it became evident that the image had become slightly distorted due to the enlarging process. I had to cut and re-tape some portions of the image to straighten them.

Photo collage showing how I transfer the design to the canvas. — In this photo collage, you can see how the white over the golden yellow turned out on the canvas.

At this point in the project, I got pretty geeked about this whole thing. I couldn’t wait to start painting.

Photo of pencil outlines of the design on the canvas. — I really wanted to get painting!

Photo showing the letter painting process on the canvas. — Instead of using a true black paint, I chose a craft paint color called Warm Black.

Photo of the red truck, all painted. — It’s all downhill from here! The truck got a little distorted in the enlarging process but I think I made it work ok.

At this point, I should tell you that I was using the black and white copy of the dishtowel to go by. I completely forgot to look at the actual dishtowel, which was in color, and could have helped me. I was looking at examples of red truck designs with these tree farm type phrases on them to get ideas for the colors for the lettering. I decided to go with this scheme shown in photo below, and then I made the colossal mistake of asking my family what they thought.

Photo of the finished canvas, but with some questionable color choice — I was pretty happy with it! For a while…

Two of the four members of my household chimed in with their opinions, which I supposed I did ask for in a round about way. In the end, I decided to tone things down a bit by changing the Farm Fresh phrase to the Warm Black color rather than the green. I’m glad I did.

Photo of the finished Farm Fresh Christmas tree sign. — Yay!

I’m really glad I did this project this year. I see things like this in the store and what keeps me from making the purchase is knowing I can make the thing myself, and usually without buying extra materials. I had the blank canvases from when I thought I was going to paint more. I always have some paint on hand. Most importantly, I usually have the time. And if I don’t have the time, I make it, simply by not cleaning my house or not doing laundry for a few days! It’s pretty straightforward. Listen family, do you want home decor or do you want clean underwear?

(Don’t answer that…)

Thanks so much for stopping by! We are getting closer to Christmas and I have been so busy with projects, but it really makes me happy. 😀 I hope you’re doing well and feeling happy, too.

Jenny

“Wood” ya call me crazy?

I’m not sure how it is where you live, but where I live, in Minnesota, you almost cannot find a winter planter without birch logs in it. Birch trees are plentiful in Minnesota, and truth be told, I have always loved the look of a birch tree or birch bark anything. In fact, I still have a mug I bought probably 30 years ago at a Cracker Barrel restaurant. I used to drink my coffee out of it, but it isn’t the greatest drinking mug, as the lip of it isn’t quite right. It makes a great holder for my crochet hooks, though.

Anyhow, I have admired the winter planters from my neighbors’ front porches, to the local shops in my town. There’s something about the white logs against darker tones of greens, golds and reds. It’s so festive yet natural! But because I’m a bit of a cheapskate, I have refused to purchase birch logs for my own planters. You might even say I grew to hate the sight of them, because they are literally everywhere and I just couldn’t make the purchase. So I had an idea.

On the surface, my idea sounds kind of dumb, I admit it. But many times, I go with a dumb idea, and am surprised with either how good the idea was, or just how ridiculous! And I’m sure I looked, um, interesting as I dragged a huge fallen branch I found on the middle school field to my back yard where I hacked it up into manageable “planter” sized logs. I couldn’t tell you what type of tree it was, but it was not birch, maple or oak.

I knew I wanted to paint these logs and turn them into “birch”, but I didn’t have that amount of white craft paint, and I wasn’t ready to buy more, so I rummaged through the storage area of my basement where I knew many cans of house paint were left for us. I used interior latex flat paint in Antique White to put a nice base coat of white on the logs, then I used some craft paints in gold and brown and black to “birchify” them. I used Google to find images of birch logs as my guide, as I transformed these basic branches into something I can hopefully reuse for a few years.

Photo of branches painted white — Antique White latex paint

Photo of one branch painted to resemble a birch log — This log-painting adventure is quite therapeutic!

Photo of several branches painted to resemble birch logs — They might be a bit too gold here.

Another photo of logs painted to resemble birch logs — Yep, I need to tone down that gold color.

I found the best way to get the black marks was to use a piece of stiff cardboard and dip the edge in my black paint, then “imprint” the black onto the log, while turning the log so the straight cardboard could make a mark on a round surface. Then I found that tapping the cardboard on the log in areas gave me some dot-dash patterns that make the logs look realistic. I also found I went a little heavy on the gold and toned it down in some areas.

I ended up with six good logs, three for each planter on my front porch. I think they look nice! I’m happy with them, and I will store them in the garage or basement in the off-season and bring them out next year. Since I painted these “free” logs with supplies I had on hand, my investment was my time, and not my money. The birch logs sell for about $4.99 each. That would’ve been $30 for my two planters. Instead, I purchased these pre-bundled greenery packs at Home Depot for my planters. Last year, I literally went around my yard and trimmed pieces off some evergreens and also some arborvitae.

Photo of a Christmas planter with greenery, pine cones, red berries and my painted birch logs. — Ta-da!! One of my two finished planters.

Thanks for stopping by! I have another big project to write about so stay tuned! For now, I have to get to bed. I am making all my Christmas cards by hand this year, so I plan on getting an early start tomorrow.

Jenny

Some Christmas Crafting!

(I get no revenue from any products I mention. I simply mention products and stores to let you know where I got something and what it is.)

Hello again! This might be a record, me writing another post in less than three months from the last time…

So, I had this nice board laying around for literally 4 or 5 years. It was on clearance from some store, likely Joann’s or Michaels. It’s a nice piece of pine, super smooth, three feet by six inches. And for some reason, my younger son used it to write (in black marker) that “Targets were 3 shillings.” Confused yet?

It’s because back in Illinois in middle school, his grade had this Patriot’s Day or something where the kids had jobs back in colonial times, and they had to dress up and stuff. Jack dressed up in this outfit I transformed for him, and we made some fake foam core board rifles that were also for “sale” at his stall. All I remember from this exercise was I did most of the work, the fake rifles were cool as heck, and he came down with the stomach flu the next day. Ah, memories…

But I digress. I kept this board, and just the other day, I saw it in the storage area of my basement and decided it was the perfect size and dimension for some sort of sign for the space above my kitchen windows. I was going to have it say “Many have eaten here, few have died” but that seemed too wordy and a lot of work. See, I don’t have a Cricut machine or some other device to cut vinyl lettering. That would be neat, but I like to do things old school, cuz I’m old-fashioned or something.

So I started by laying on the floor of my craft room and sketching things out in pencil on the board. But then I started thinking about the edge instead and grabbed some supplies I already had to start laying out ideas for a fun border. I’m sure somewhere in the back of my brain I was thinking about what this sign would say. I thought I wanted something for the holidays.

I could picture in my head how cute this would look with lime green beads and the fuzzy pom-poms that have just a bit of sparkle to them. Next, I found an example of lettering that I had in mind and set out to sketch some letters on graph paper. Whenever I had a repeat letter, I used my light table to trace the one I already had for consistency.

Photo of wood with sketched out letters on paper — I really struggled with that “S”

Photo of my marker sketch of how I thought the final project should turn out — This is what I had in mind for the lettering and the edging.

Next, I painted the wood with two or three coats of red craft paint. While that was drying, I had two important jobs to do. One, I had to paint the beads. I had just the right amount of beads, too. I wanted to use things I already had instead of needing to purchase any supplies. The second job was to liberally apply pencil on the backs of each letter for the purpose of transferring the outline of each letter onto the board once the red paint was dry.

Photo collage of the process of painting wooden beads. — As you can see, I changed my mind about the lime green, and made a new green by mixing my lime craft paint with a more standard green.

When the red paint was thoroughly dry and I was happy with the coverage of the “18” that my son had drawn on (the other side says Targets 3 shillings and some scribbles…), it was time to transfer the lettering onto the red painted board, the old school way. I found I needed to press pretty hard to get the pencil markings to transfer onto red paint. It worked great!

Photo of transferring lettering onto red painted board — Old school method! Still works great.

Now it was time to paint the letters white. I used a tube of artists’ acrylic paint to get the maximum coverage. I didn’t have a fresh container of white craft paint and I worried I would run out. The acrylic paint was thick, but I soon got used to it and filled in the letters. The good thing about the lettering style I chose is that I knew a black paint pen was going to be used to outline all the letters, so my painting didn’t have to be spot-on perfect on the very edges of each letter.

Photo of sign with letters painting, showing one coat of paint vs two coats. — The “S” was slightly improved.

It took two coats, even though I could’ve gotten away with one. Next, it was time to use the black paint pen (Sharpie brand) and outline each letter as well as add the drop shadow. This part made me kind of nervous because paint pens generally have oil-based paint in them and I knew a boo-boo could cause a big problem for me.

Photo of me using a black paint pen to outline each painted letter. — Paint pens can sometimes malfunction and release a blob of paint. I was nervous but I just kept at it, and it did not happen…this time….

Starting to look like a Netflix sign, according to my older son! Also, can you see the slight sparkle of the white pom-poms? Fun, aren’t they?

When all my beads were nice and green and had two coats of glossy Mod Podge on them, I knew I could start gluing them and the pom-poms to the edge of the board. I want to note here that I’m totally aware that these beads can easily pop off since hot glue isn’t as strong as maybe an E-6000 or superglue, but since the sign is for my house, and I know I have to carefully store it in the off-season, I was willing to take that risk. However, I laid my beads and pom-poms out a little differently and went too fast, gluing all the pom-poms on, when I realized I was short two beads. And I looked and had no more of that size. That’s when my air-dry clay came to the rescue!

I had most of the sign completed and just needed one night for the clay beads to dry. The next morning, I was able to match the green paint color, paint the beads and give them two coats of Mod Podge. I thought about coating the entire board in the Mod Podge, but decided against it. I like how the red and white is a matte finish, and the beads and black paint pen have a slight sheen.

I think the sign turned out super cute, and I have yet to install it above my kitchen window. I will do that right after Thanksgiving, when I get the rest of my Christmas decor up.

I also finished up a project I started last month, which is this puffy coffee filter wreath!

I found a few different tutorials online and only needed to glance at those to determine how I was going to make this. I purchased a foam wreath form, using a coupon from Joann’s, and I purchased 300 white coffee filters from the grocery store. I have a lot of glue sticks for my gun. I had this about half done last month and got bored (typical me) but today I decided it’s getting done! And it did. And I love it!! The neat thing about this wreath is that it can be used all year round. It’s easy to use a different hanging ribbon. Some people have dyed their coffee filters first, but I was in the mood for a stark wreath.

Well, thanks for hanging in there for my latest crafty adventure. I had a ton of fun doing these projects, and I hope it inspired you to get crafty! Who knows, you might have a blank board laying around and some good ideas rolling around your head!

Jenny